China Underground heat exchanger Manufacturers Factory Suppliers
-
Mine Return Air Heat ExchangerExchange Type: Air-to-Air Heat Pipe Exchangerread more
Exchange Efficiency: 60% – 80%
Air Volume: 10,000 – 200,000 m³/h
Air Side Resistance: ≤150 Pa
Heat... -
Mine Exhaust Air Waste Heat Recovery UnitRecovery Efficiency: 60% - 85%read more
Exhaust Air Temperature: 5 - 30°C (Stable Year-round)
Air Volume: 50,000 - 500,000 m³/h
Heating COP: 3.0 - 5.0
Outlet Water... -
Air Compressor Waste Heat Recovery SystemFor oil-injected screw compressors, the heat recovery efficiency is over 60%.read more
Air channel resistance: < 2 kPa
Air inlet temperature: 100°C
Air flow rate: 20,000 m³/h
Working... -
Separated Heat Pipe Heat Recovery UnitExchange Efficiency: 55% - 70%read more
Evaporation Section Temperature: 50°C - 200°C
Condensation Section Temperature: 20°C - 80°C
Transport Distance: Horizontal ≤... -
Mine Seepage Water Heat Recovery UnitSeepage Water Temp: 15–35℃ (Stable Year-round)read more
Water Treatment Capacity: 50–500 m³/h
Heat Pump COP: 4.0–5.5
Outlet Water Temp: 45–55℃
Pre-treatment: Filtration, Descaling,... -
Vertical Ground Loop Heat Pump SystemUnderground Soil Temp: 15–18℃ (Stable Year-round)read more
Heating COP: 4.0–5.0
Cooling EER: 3.5–4.5
Ground Loop Type: Vertical U-pipe (Single/Double U)... -
Gradient Waste Heat Recovery EquipmentRecovery Stages: 2–4 Level Gradient Utilizationread more
High-Temperature Stage (>150℃): Power Generation / Steam Production
Medium-Temperature Stage (80–150℃): Absorption Cooling... -
Mine Drainage Heat Recovery UnitDrainage Temperature: 18–30℃read more
Drainage Volume: 50–1000 m³/h
Recovery Efficiency: ≥70%
Heat Pump COP: 4.0–5.5
Outlet Water Temp: 45–55℃ -
Flue Gas Heat Recovery UnitFlue Gas Inlet Temperature: 150–350℃read more
Flue Gas Outlet Temperature: 90–120℃
Heat Exchange Efficiency: 60%–80%
Flue Gas Resistance: ≤200 Pa
Material:... -
Mine Vent Air Heat Recovery UnitExhaust Air Temperature: 15–25℃read more
Exhaust Air Volume: 100,000–500,000 m³/h
Heat Exchange Efficiency: 60%–75%
Fresh Air Temperature Rise: 8–15℃... -
Industrial Mine Heat PumpHeating COP: 3.5–4.5read more
Outlet Water Temperature: 80–85℃
Operation Method: Two-Stage Heat Pump Series System
Heat Source: Air Source + Water Source (Combined or... -
Mine Waste Heat Recovery Heat ExchangerHeating Tube Material: 304 Seamless Stainless Steelread more
Insulation Layer: Imported Magnesium Oxide Powder (≥95% Purity)
Temperature Resistance: 800℃
Sealing Parts: 95...
WebGeothermal heat pumps (GHPs), sometimes referred to as GeoExchange, earth-coupled, ground-source, or water-source heat pumps, have been in use since the late 1940s....
WebAug 1, 2017 · Geothermal heat pumps can operate in any climate—hot or cold—because of the earth’s constant underground temperature (from 45° to 75° F depending on location). In fact, millions of...
WebSep 7, 2017 · The term ground-source heat pump (GSHP) refers to the family of heat pump systems that use the ground, groundwater, or surface water as a heat sink and source to...
WebThe heat exchanger is underground, so it doesn't take up any usable space in your building. The heat pump is similar sized to a boiler or furnace, but does not need to be...
WebThis chapter describes horizontal ground heat exchanger (GHE) technology that is commonly applied to residential buildings and small non-residential buildings along with...
WebMay 1, 2006 · 1. Introduction The underground heat exchanger has various types, such as U-vertical pipe, horizontal pipe, spiral pipe, etc. The types of backfill materials are also...
