Mining Waste Heat Utilization Device
Heat Utilization Applications
Recovered heat can be used for:
- Mine shaft heating: Heat supply for mine shaft heating applications.
- Building space heating: Heating for mine buildings and associated facilities.
- Domestic hot water: Hot water production for mine-site domestic use.
The published hot water outlet temperature is 45–55°C.
-
Mine Exhaust Air Waste Heat Recovery UnitRecovery Efficiency: 60% - 85%read more
Exhaust Air Temperature: 5 - 30°C (Stable Year-round)
Air Volume: 50,000 - 500,000 m³/h
Heating COP: 3.0 - 5.0
Outlet Water... -
Air Compressor Waste Heat Recovery SystemFor oil-injected screw compressors, the heat recovery efficiency is over 60%.read more
Air channel resistance: < 2 kPa
Air inlet temperature: 100°C
Air flow rate: 20,000 m³/h
Working... -
Mine Water Source Heat Pump UnitSingle Unit Heating Capacity: 500kW – 2000kWread more
Heating COP: 4.0 – 6.0
Water Source Inlet Temperature: 10°C – 25°C
Heating Outlet Temperature: 45°C... -
Mine Return Air Heat ExchangerExchange Type: Air-to-Air Heat Pipe Exchangerread more
Exchange Efficiency: 60% – 80%
Air Volume: 10,000 – 200,000 m³/h
Air Side Resistance: ≤150 Pa
Heat... -
Separated Heat Pipe Heat Recovery UnitExchange Efficiency: 55% - 70%read more
Evaporation Section Temperature: 50°C - 200°C
Condensation Section Temperature: 20°C - 80°C
Transport Distance: Horizontal ≤... -
Mine Waste Water Heat Pump SystemHeating Capacity: 500 kW – 3000 kWread more
Heating COP: 3.5 – 5.0
Wastewater Temperature: 10°C – 25°C
Water Supply Temperature: 45°C – 55°C... -
Coal Mine Methane Heat Recovery DeviceExhaust Gas Recovery Efficiency: 70% – 85%read more
Exhaust Gas Inlet Temperature: 350°C – 550°C
Exhaust Gas Outlet Temperature: ≤120°C
Jacket Water Recovery... -
Mine Seepage Water Heat Recovery UnitSeepage Water Temp: 15–35℃ (Stable Year-round)read more
Water Treatment Capacity: 50–500 m³/h
Heat Pump COP: 4.0–5.5
Outlet Water Temp: 45–55℃
Pre-treatment: Filtration, Descaling,... -
ORC Waste Heat Power Generation EquipmentHeat Source Temperature: 80–200℃read more
Single Unit Power: 50 kW – 1000 kW
Generation Efficiency: 10% – 18%
Organic Fluid: R245fa / R123
Turbine Type:... -
Vertical Ground Loop Heat Pump SystemUnderground Soil Temp: 15–18℃ (Stable Year-round)read more
Heating COP: 4.0–5.0
Cooling EER: 3.5–4.5
Ground Loop Type: Vertical U-pipe (Single/Double U)... -
Gradient Waste Heat Recovery EquipmentRecovery Stages: 2–4 Level Gradient Utilizationread more
High-Temperature Stage (>150℃): Power Generation / Steam Production
Medium-Temperature Stage (80–150℃): Absorption Cooling... -
Mine Drainage Heat Recovery UnitDrainage Temperature: 18–30℃read more
Drainage Volume: 50–1000 m³/h
Recovery Efficiency: ≥70%
Heat Pump COP: 4.0–5.5
Outlet Water Temp: 45–55℃
Waste Heat Recovery Performance
The unit uses mine exhaust air as a heat source for mine heating and hot water applications.
| Parameter | Published Value |
|---|---|
| Heat recovery efficiency | 60%–85% |
| Heating COP | 3.0–5.0 |
| Mine exhaust air temperature | 5–30°C |
| Air handling capacity | 50,000–500,000 m³/h |
| Hot water outlet temperature | 45–55°C |
| Fan pressure | 150–300 Pa |
The published Heating COP of 3.0–5.0 means that each 1 kW of electrical input corresponds to 3–5 kW of heat output under the applicable operating conditions.
Heat Exchanger Configurations
We offer two heat exchanger configurations for mine exhaust air waste heat recovery:
| Configuration | Availability |
|---|---|
| Heat pipe heat exchanger | Available |
| Plate heat exchanger | Available |
The configuration is selected according to the mine exhaust air conditions and application requirements.
The equipment incorporates anti-corrosion and anti-clogging structures for mine exhaust air environments characterized by high humidity and dust.
Customized System Design
We provide customized mine exhaust air waste heat recovery system design based on specific mine exhaust air conditions. Design considerations include exhaust air temperature, airflow volume and the intended heat utilization application.
Heat pipe and plate heat exchanger configurations are available for selection.
Engineering Support, Warranty and After-Sales Service
We provide engineering and project support for mine waste heat utilization projects, including system design, equipment manufacturing, installation guidance, commissioning and technical training.
Our published service commitments include:
- Warranty: 12 months.
- Performance verification: Energy efficiency performance testing services.
- Technical response: After-sales team response within 24 hours.
- Warranty support: Technical support and maintenance services for performance problems caused by scaling or corrosion during the warranty period.
Request a Mine Exhaust Air Waste Heat Recovery Solution
Send us your mine exhaust air temperature, airflow volume, operating conditions and intended heat utilization requirements. We can use your project information to assess the applicable system configuration and prepare a quotation for your mine exhaust air waste heat recovery project.
As one of the most professional mining waste heat utilization device manufacturers and suppliers in China, we're featured by high quality customized products. Welcome to wholesale advanced mining waste heat utilization device in stock here and get quotation from our factory. Good service and punctual delivery are available.
Send Inquiry
