Mining Underground Heat Disaster Treatment Unit
Our Mining Waste Heat Utilization Devices recover usable thermal energy from mine drainage, mine water, mine wastewater, and mine exhaust air. As an industrial equipment manufacturer and supplier in China, we offer Mine Drainage Heat Recovery Units, Mine Water Source Heat Pump Units, Mine Waste Water Heat Pump Systems, and Mine Exhaust Air Waste Heat Recovery Units. Each type has different operating parameters and configurations for its specific heat source.
-
Underground Mine Cooling EquipmentCooling Capacity Range: 100 kW – 3000 kWread more
Evaporation Temperature: 0℃ – 5℃
Condensation Temperature: 35℃ – 45℃
Cooling COP: 3.0 – 4.5
Power... -
Mining Underground Cooling SystemSingle Unit Cooling Capacity: 50 kW – 500 kWread more
Air Supply Temperature: 16℃ – 22℃
Air Volume: 5,000 – 30,000 m³/h
Working Ambient Temperature: 25℃ –... -
HEMS High Efficiency Heat Exchange SystemTotal Cooling Capacity: 1289 kWread more
Unit Size: 3790 × 1500 × 2100 mm
Cooling Source: Mine Water
Application: Deep Mine Heat Control
Cooling Condition:... -
Mining Underground Cooling UnitCooling Capacity: 500 kW – 2000 kWread more
Evaporation Temperature: 0℃ – 5℃
Condensation Temperature: 40℃ – 45℃
Compressor Type: Explosion-proof Screw
Power... -
Mine Explosion Proof Downhole Cooling UnitNominal Cooling Capacity: 100KW - 1000KWread more
Explosion-proof Rating: Exd I Mb
Power Supply: 660V / 1140V, Three-phase 50Hz
Cooling COP: ≥3.0
Chilled Water Temperature... -
Mine Partial Area Cooling UnitCooling Power: 30 kWread more
Cooling Air Volume: 30 m³/min
Outlet Temperature Difference: ≥10℃
Refrigerant: New Environmentally Friendly Type
Control Method:... -
Split-type Underground Mining Cooling DeviceSingle Unit Cooling Capacity: 10 kW – 100 kWread more
Application Areas: Mining Faces, Electrical Chambers
Air Supply Temperature: 16℃ – 20℃
Air Volume: 1,000 –... -
Downhole Central Cooling Station UnitTotal Station Cooling Capacity: 2,000 kW – 10,000 kWread more
Single Unit Capacity: 500 kW – 2,000 kW
Cooling COP: ≥3.5
Chilled Water Supply Temperature: 3℃ –... -
Underground Mine Air CoolerNominal Cooling Capacity: 400 kWread more
Evaporation Temperature: 2℃
Condensation Temperature: 45℃
Condenser Water In/Out: 30℃ / 40℃
Condenser Water Flow: 40 m³/h
1. Mining Waste Heat Recovery Solutions
| Product Type | Heat Source | Main Application |
|---|---|---|
| Mine Drainage Heat Recovery Unit | Mine drainage water | Shaft antifreeze heating and building heating |
| Mine Water Source Heat Pump Unit | Mine water | Winter heating and summer cooling |
| Mine Waste Water Heat Pump System | Mine wastewater | Wastewater heat recovery and heating |
| Mine Exhaust Air Waste Heat Recovery Unit | Mine exhaust air | Shaft antifreeze heating, building heating and domestic hot water |
2. Mining Waste Heat Recovery Equipment Specifications
Mine Drainage Heat Recovery Unit
Designed to recover heat from mine drainage for heating applications.
| Parameter | Specification |
|---|---|
| Mine drainage temperature | 18–30°C |
| Drainage flow rate | 50–1,000 m³/h |
| Heat recovery efficiency | ≥70% |
| Heat pump COP | 4.0–5.5 |
| Outlet water temperature | 45–55°C |
| Heat recovery capacity | 100–5,000 kW |
| Water treatment | Automatic filtration and descaling |
| Warranty | 12 months |
System capacity can be designed according to actual drainage conditions. Water quality testing and flow assessment are available.
Mine Water Source Heat Pump Unit
Designed for mine water heating and cooling applications.
| Parameter | Specification |
|---|---|
| Heating capacity per unit | 500–2,000 kW |
| Heating COP | 4.0–6.0 |
| Water source inlet temperature | 10–25°C |
| Heating outlet water temperature | 45–55°C |
| Compressor type | Screw / centrifugal |
| Refrigerant | R134a / R410A |
| Power supply | 380V / 660V, 50Hz |
| Control system | Fully automatic PLC control |
| Warranty | 12 months |
Screw and centrifugal compressors are listed options. Heat exchanger materials can be selected according to mine water quality analysis.
Mine Waste Water Heat Pump System
Designed to recover heat from mine wastewater. The system uses a special anti-clogging heat exchanger and online automatic backwashing.
| Parameter | Specification |
|---|---|
| Heating capacity | 500–3,000 kW |
| Heating COP | 3.5–5.0 |
| Wastewater temperature | 10–25°C |
| Heating water outlet temperature | 45–55°C |
| Wastewater treatment capacity | 50–500 m³/h |
| Heat exchanger | Special anti-clogging design |
| Cleaning method | Online automatic backwashing |
| Cleaning operation | Without shutting down the system |
| Warranty | 12 months |
The published system configuration allows direct use of untreated wastewater without pretreatment. Online automatic backwashing cleans the heat exchanger without stopping system operation.
Mine Exhaust Air Waste Heat Recovery Unit
Designed to recover low-grade heat from mine exhaust air for shaft antifreeze heating, building heating and domestic hot water production.
| Parameter | Specification |
|---|---|
| Exhaust air temperature | 5–30°C |
| Airflow rate | 50,000–500,000 m³/h |
| Heat recovery efficiency | 60%–85% |
| Heating COP | 3.0–5.0 |
| Outlet water temperature | 45–55°C |
| Fan pressure | 150–300 Pa |
| Heat exchanger type | Heat pipe / plate type |
| Warranty | 12 months |
Heat pipe and plate heat exchangers are available options. System design can be customized according to actual mine exhaust air conditions. Energy performance testing is available to verify the designed heat recovery target.
3. Mining Heat Recovery System Configuration and Water Quality Adaptation
Water quality and heat source conditions determine the appropriate heat exchanger design and system configuration.
Available configurations include:
- Automatic filtration and descaling: For the Mine Drainage Heat Recovery Unit.
- Corrosion-resistant heat exchanger design: For the Mine Water Source Heat Pump Unit, with material selection based on water quality analysis.
- Anti-clogging heat exchanger: For the Mine Waste Water Heat Pump System.
- Online automatic backwashing: For the Mine Waste Water Heat Pump System, allowing cleaning without shutting down operation.
- Heat pipe or plate heat exchanger: For the Mine Exhaust Air Waste Heat Recovery Unit.
Water quality analysis is available to support heat exchanger material selection for mine water and wastewater projects.
4. Customized Mining Waste Heat Recovery Equipment and Project Support
We provide project-specific system design according to the available heat source and operating conditions.
| Customization Item | Available Options or Service |
|---|---|
| System capacity | Designed according to actual mine drainage conditions |
| Heat exchanger materials | Selected according to mine water quality analysis |
| Wastewater heat exchanger | Special anti-clogging configuration |
| Exhaust air recovery system | Customized according to actual mine exhaust air conditions |
| Exhaust air heat exchanger | Heat pipe / plate type |
| Energy performance verification | Testing against the designed heat recovery target |
| Project assessment | Water quality testing and flow assessment |
Our technical support includes equipment selection, system design, remote commissioning guidance and project-related technical assistance.
5. Mining Heat Pump Engineering and Manufacturing Capabilities
We provide engineering design, equipment supply, system integration, installation and commissioning services for industrial heating and automation projects.
Our company has 112 employees, including 25 engineers and 35 technical personnel. Our organizational structure includes a design and research institute, engineering department, project department and quality assurance department.
Our engineering capabilities cover:
- Industrial system design and engineering integration.
- Automation and control system integration.
- Project installation and commissioning.
- Technical support during equipment selection and project implementation.
We also develop industrial monitoring and control software.
6. Warranty and After-Sales Service
The published warranty period for the four listed mining waste heat recovery product types is 12 months.
Our after-sales service includes:
- Technical support for equipment operation.
- Remote commissioning guidance.
- Project-related technical assistance.
- After-sales team response within 24 hours.
7. Request a Mining Waste Heat Recovery Equipment Quotation
Send us your available mine heat source information, operating parameters or project specifications. We can assess the appropriate equipment type and discuss a suitable system configuration.
For an initial quotation, please provide:
- Heat source type: mine drainage, mine water, mine wastewater or mine exhaust air.
- Available water temperature and flow rate, or exhaust air temperature and airflow.
- Required heating capacity and outlet water temperature.
- Available water quality analysis, if applicable.
- Project location and installation conditions.
Contact us with your existing project specifications or technical documents to discuss equipment selection and pricing.
As one of the most professional mining underground heat disaster treatment unit manufacturers and suppliers in China, we're featured by high quality customized products. Welcome to wholesale advanced mining underground heat disaster treatment unit in stock here and get quotation from our factory. Good service and punctual delivery are available.
HEMS heat exchange unit, Mine central refrigeration unit, Mine cooling unitSend Inquiry
